View Source

Every now and then you may need to trigger a manual run for a source or platform job.

This page explains how to use the Batch Manager to perform this function.

This function is restricted to K Administrators

Manually triggering a source run

After the manual run is triggered, a pop up bar will appear containing a link that can take you to the Monitor tab where you can check the progress of the job.

Troubleshooting failed loads

If the job failed at the extraction step
- Check the error. Contact KADA Support if required.
- Rerun the source job
If the job failed at the load step, the landing folder failed directory will contain the file with issues.
- Find the bad record and fix the file
- Rerun the source job

Select Platform Settings in the side bar
In the pop-out side panel, under Platform Settings click on Batch Manager
Select the Platform job you want to manually trigger and click Run
A pop-up will appear. Set the manual Click RUN to start the job.
- In some cases a As_At DATE may need to be provided
- KADA Support will advise when to set this.