/
Deploying to your own Kubernetes Service
Document toolboxDocument toolbox

Deploying to your own Kubernetes Service

Owned by Dean Nguyen
Last updated: Jun 06, 2024 by Ben
6 min read

Note: The commands referenced in this document will be kubernetes cli specific but the same can be used by changing the kubectl command to oc using the openshift cli

This document is split into 2 sections:

  1. New deployment will take you through the steps to deploy K for the first time.

  2. Upgrades will take you through the steps to update your K installation.

 

Before you start

You should have

  1. Received a configuration package from KADA.

  2. Be familiar or be knowledgable about the network and load balancer settings for exposing services on your Kubernetes instance.

  3. Request from your network team a DNS alias and certificate for the KADA Platform.

  4. Access to an environment a Kubernetes cluster

  5. In your local environment

    1. Install kubectl

    2. Install your cloud provider cli: eg azure cli, aws cli

    3. For windows environments install gitbash.

 

1. New Deployments

A new deployment will take approximately 1 hour in duration to complete.

The commands in the steps below assume you are running in a unix bash env.

We strongly recommend using a Linux based environment over windows for compatibility of the deployment scripts. However windows use may run gitbash if you are deploying from a windows environment.

Step 1) Create a new Kubernetes cluster.

Kubernetes Service Providers supported: Amazon’s Elastic Kubernetes Service (EKS) & Microsoft Azure’s Kubernetes Service (AKS). Our customers have deployed onto Openshift Kubernetes Service. Reach out for assistance with other Kubernetes options that are not listed.

For cluster requirements see How to deploy on your cloud | Minimum infrastructure requirements

Step 2) Setting up access to KADA Image repository

KADA will provide a KADA_CLIENT_ID and KADA_CLIENT_SECRET to access the KADA Image repository. The following setups your Kubernetes service to access the repository

Create a secrete

kubectl create secret docker-registry kada-image-credentials \ --docker-server=kadaexternal.azurecr.io \ --docker-username=$KADA_CLIENT_ID \ --docker-password=$KADA_CLIENT_SECRET

Patch the service account with the above secret

kubectl patch serviceaccount <the service_account or "default"> \ -p "{\"imagePullSecrets\": [{\"name\": \"kada-image-credentials\"}]}"

If your Kubernetes cluster does not have internet access to pull images then contact KADA Support for assistance to download images into your internal image repository.

Step 3) Creating a certificate

Create a certificate and key

Raise a certificate request for the domain hosting the K Platform.

Generate a full chain certificate. The cert file should contain the root CA and all intermediary certificates.

The certificate should be in the format of a *.crt and *.key file.

The cert should be signed via a trust authority that is trusted by your organisations browser. This is so there are no cert issues when user accesses K from a browser.

Load the cert / key into Kubernetes

kubectl create secret tls kada-ssl-cert --cert /path/to/fullchain.cer --key /path/to/certificate.key

 

Step 4) Kubernetes ingress

Your organisation will most likely have a standard pattern for routing network traffic to a Kubernetes cluster via a Load Balancer / HA Proxy / Ingress routes.

Using your organisations Load Balancer and ingress service

KADA Deployment can make use of your organisations pattern with a few additional configuration steps.

Note the domain of the Load Balancer URL. We will refer to this as DOMAIN_URL from here on.

[OPENSHIFT ONLY] Openshift Load Balancer definition

cert:<GENERATED BY YOUR ORGANISATION> key:<GENERATED BY YOUR ORGANISATION> caCertificate:<GENERATED BY YOUR ORGANISATION> host: <the DOMAIN_URL> to:{"kind":"Service","name":"<name of ingress service>"} port:{"targetPort": "<port defined in ingress default is 8080>"} maps to the ingress network port (step 9) tls:termination:edge

Add the following mappings to the config of your organisation’s ingress

List on *:8080 /keycloak -> keycloak-cluster-ip-service.<REPLACE WITH PROJECT NAMESPACE>.svc.cluster.local:8080 /api -> cerebrum-cluster-ip-service.<REPLACE WITH PROJECT NAMESPACE>.svc.cluster.local:5002 /solr -> solr-gatekeeper-cluster-ip-service.<REPLACE WITH PROJECT NAMESPACE>.svc.cluster.local:8888 / -> cortex-cluster-ip-service.<REPLACE WITH PROJECT NAMESPACE>.svc.cluster.local:9002

 

Deploy KADA’s generic Load Balancer and ingress service

If you are not using your own load balancer / ingress service you can use the one packaged with the K Platform.

kubectl apply -f cortex/k8s-ingress-nginx


Step 5) Deploying KADA Services into Kubernetes

  1. Download the distribution package and unzip it

    unzip kada_x.x.x.zip

  2. Navigate to the kube_setup directory

    cd d_pkg/kube_setup

  3. Populate the k8s_env.sh with the correct values according to your desired values

    export HOST= export KADA_ADMIN_PASSWORD= export POSTGRES_PASSWORD= export KEYCLOAK_PASSWORD= export KEYCLOAK_POSTGRES_PASSWORD= export CEREBRUM_SECRET= export SOLR_SECRET= export FERNET_KEYS=

    NOTES

    1. HOST is in the format of the alias name or canonical host name. It must be lowercase e.g. if I intend to access K via https://prod.kada.ai , then the host value is prod.kada.ai

    2. FERNET_KEYS should be generated using one of these methods

      1. Python

        from cryptography.fernet import Fernet Fernet.generate_key()

      2. Unix shell

        echo $(dd if=/dev/urandom bs=32 count=1 2>/dev/null | openssl base64)

    3. SSL_SECRET_NAME is the Kubernetes secret name you installed the SSL Certificate as

    4. Avoid special characters in the values above if possible. Any value that contains the following special characters need to be escaped with a \ backslash:

      1. \ → \\\\

      2. ` → \`

      3. $ → \$

    5. Save k8s_env.sh in a secure location so that it can be used when upgrading to the K Platform.

  4. Run to create a generated-k8s-common folder containing 2 yaml files.

    ./kada_gen.sh

  5. Make sure kubectl is configured and pointing to a Kubernetes cluster.

  6. Deploy the generated config

    kubectl apply -f generated-k8s-common

  7. Deploy the K platform. Note the y arg will deploy an ingress which terminates SSL.

    ./kada_deploy.sh y

  8. [OPENSHIFT ONLY] Update the users that k8s runs the contains

    # Find the uid-range that can run in the project (numerator part) oc describe project <project_name> | grep sa.scc.uid-range $ openshift.io/sa.scc.uid-range=1002060000/10000 # For each config file replace the values with the uid for the following properties. runAsUser fsGroup pv.beta.kubernetes.io/guid

  9. Modify PV Policy

Modify all Persistent Volumes associated to the deployment to ensure that the Reclaim Policy is set to Retain. This is important to prevent data loss in the event of prolonged node outage.

kubectl get pv

For these 2 claims, set to Retain

  • default/postgres-storage-postgres-statefulset-0

  • default/keycloak-postgres-storage-keycloak-postgres-statefulset-0

kubectl patch pv <REPLACE WITH pv name eg pvc-xxxxxxxxxxxx> -p '{"spec":{"persistentVolumeReclaimPolicy":"Retain"}}'

Then run to validate Reclaim policy has updated to Retain

kubectl get pv

Step 6) Post deployment verification

Check all Kubernetes services are running and not in error

setup-solr and setup-postgres may have multiple pod instance where some have status failed. This is normal provided as there an instance of each with STATUS: COMPLETED.

kubctl get pods

Example of expected output

NAME READY STATUS RESTARTS AGE cerebrum-celery-batch-worker-deployment-6879558f88-btnd9 1/1 Running 0 3h54m cerebrum-celery-extract-worker-deployment-5dd688875f-gg7q8 1/1 Running 0 3h54m cerebrum-celery-impact-worker-deployment-84cf999969-mscgt 1/1 Running 0 3h54m cerebrum-celery-interactive-worker-deployment-6c5846cf48-hxts5 1/1 Running 0 3h54m cerebrum-celery-scheduler-deployment-7df5848b95-r8wnw 1/1 Running 0 3h54m cerebrum-celery-usage-worker-deployment-6d7d445654-j6fzk 1/1 Running 0 3h54m cerebrum-celery-watcher-deployment-7bbbc4797f-mr87m 1/1 Running 0 3h54m cerebrum-celery-worker-deployment-86d5fb9586-knhx6 1/1 Running 0 3h54m cerebrum-deployment-67b4c54b57-jbfr7 1/1 Running 0 3h54m cortex-deployment-7d4985fd46-whm6b 1/1 Running 0 3h54m keycloak-deployment-7f7d447656-hwkcj 1/1 Running 0 3h54m keycloak-postgres-statefulset-0 1/1 Running 0 3h54m postgres-statefulset-0 1/1 Running 0 3h54m redis-statefulset-0 1/1 Running 0 3h54m reset-postgres-vrs9p 0/1 Completed 0 3h54m solr-gatekeeper-deployment-646c8bbfdc-jb5z5 1/1 Running 0 3h54m solr-statefulset-0 1/1 Running 0 3h54m

Check the status API. It should return 200 if successful

https://<YOUR DOMAIN>/api/status

Step 7) Setup Users

KADA uses Keycloak to manage users in platform.

The Keycloak portal is accessible at the following link

http://<YOUR DOMAIN>/keycloak/auth/admin/master/console/#/realms/kada

User can be setup locally Managing local users (Add, Edit, Delete, Reset Password) or configured for SSO Configuring SSO with Azure Active Directory / Entra ID .

Step 8) Setup Landing Storage

KADA uses object store as a landing zone to process metadata and log files.

We currently support AWS s3, Azure Blob or local attached Kubernetes PVs.

To setup log into the KADA Platform http://<YOUR DOMAIN> and navigate to Platform Settings > Settings

 

AWS s3 setup

storage_type = s3

storage_root_folder = <s3 bucket name>

storage_aws_region = <Your AWS region >

storage_aws_access_key_id = <Your AWS IAM user access key>

storage_aws_secret_access_key = <Your AWS IAM user secret>

 

Azure Blob setup

Configure the following in Admin > Platform Settings > Settings

storage_type = azure

storage_root_folder = <Azure container name>

storage_azure_storage_account = <Your azure storage account>

storage_azure_access_key = <Your azure storage account access key>

Performing an upgrade to your K installation

Step 1 ) Pre checks

Check that no jobs are currently running. Admin > Monitor.

Step 2) Deploying KADA updates

  1. Download the distribution package and unzip it

    unzip kada_x.x.x.zip

  2. Navigate to the kube_setup directory

    cd d_pkg/kube_setup

  3. Populate the k8s_env.sh or overwrite with the k8s_env.sh from a prior deployment

  4. Deploy the K platform.

    ./kada_deploy.sh y

Step 3) Post deployment verification

Follow the same verification as per New Deployments (Step 5 in New Deployments)

Related content